Carbonate buildups of the Leduc Formation in central Alberta are an attractive target for CO2 sequestration. The reefal buildups have been the focus of oil and gas production for many decades and are now mostly in a state of abandonment or enhanced recovery schemes. Despite the possibilities for sequestration in this formation, very little work has been done to quantify—even at a high level—the capacity of these buildups to sequester anthropogenic CO2. While a small number of production-based estimates exist for some of the hydrocarbon pools, no estimations for the vast saline aquifer portions of the buildups are publicly available. This study provides a regional CO2 capacity estimation for both the hydrocarbon-bearing and saline aquifer portions of the Leduc Formation in central Alberta—a formation comprising more than 23 buildups in the study area. Three methodologies are applied based on extensive stratigraphic mapping, petrophysical evaluation, and a stochastic approach to 3D property modelling in a multi-million-cell Petrel model: 1) a fluid substitution method involving hydrocarbon production databases, and volumetric approaches using the well-known U.S. Department of Energy and National Energy Technology Laboratory (DOE-NETL) methods for 2) hydrocarbon pools and 3) saline aquifers. Capacity estimations for the saline aquifer portion of the Leduc Formation total 1.66 gigatonnes of CO2 (P50). Aggregated volumetric estimations for the oil and gas pools are greater than 349 megatonnes of CO2 (P50), which is less than that estimated from the fluid substitution method at 629 megatonnes. Total P50 capacity estimation from the pools and saline aquifers within the study area is greater than 2.01 gigatonnes of CO2. Given that this estimate far exceeds the annual emissions in Alberta at 256 megatonnes as of 2021, and the proximity of the buildups to industrial point-source emitters, the Leduc Formation has significant potential to contribute to Canada’s net-zero emissions plans. Capacity estimations may also aid in evaluating the use of pore-space in these buildups for purposes other than CO2 sequestration, such as geothermal, lithium from brines, and water disposal. In addition to the Leduc Formation capacity estimation work, the Ireton Formation, which forms the caprock to the Leduc buildups, was regionally mapped and assessed from several cores for the purposes of caprock integrity assessment, which included X-ray fluorescence analysis. Twenty Mercury Injection Capillary Pressure tests were performed on seven lithofacies to assess the entry and threshold pressures to CO2. The results show that theoretical CO2 column heights across much of the study area may be significant.
Hauck, T.E., Lyster, S., Palombi, D., Knapp, L.J., Maliki, L. and Virues, C. (2026): CO2 capacity estimation and caprock assessment of the Leduc-Ireton storage complex in central Alberta; Alberta Energy Regulator / Alberta Geological Survey, AER/AGS Report 103, 77 p.